Download document () of 20
Send email
Download
You have exceeded the download limit
750W PowerVerter APS 12VDC 120V Inverter/Charger with Auto-Transfer Switching, 2 Outlets
Delivering Reliable Power Away from Standard AC Outlets
This inverter/charger is a reliable power source for a wide variety of equipment ranging from power tools and pumps to portable lighting and computer equipment in heavy-load conditions. With no fumes, fuel or excess noise, it’s an excellent alternative to generator power. It converts stored power from a DC battery source to safe, stable, computer-grade AC power for unlimited runtime.
Recommended for Mobile, Emergency and Remote Sites
Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment, this power inverter is ideal for powering tools, saws, motors, pumps, portable lighting, appliances and computer equipment in heavy-load conditions.
Meets Normal and Peak Power Demands
The DC-to-AC inverter features an automatic line-to-battery transfer switch and integrated charging system that allow it to work as a vehicle inverter, standalone AC power source or extended-run UPS system. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage.
Serves as a Battery Charger
When external AC power is supplied and powering connected equipment, this charger/inverter keeps the user-supplied battery charged while simultaneously delivering AC power to connected equipment.
| Product Name |
Eaton Tripp Lite series PowerVerter power inverter and charger
|
| Catalog Number |
APS750
|
| UPC |
037332121608
|
| Product Length/Depth |
10.6 in
|
| Product Height |
12.4 in
|
| Product Width |
10.6 in
|
| Product Weight |
17 lb
|
| Compliances |
RoHS
|
| Product Type |
Power inverter and charger
|
| Special features |
Important Note_x000D_
_x000D_
Position a 125A fuse link less than 18 in. from the battery in the positive line to protect against high-current draw that may occur during inverter failure.
|
| Battery Charge |
20A
|
| Expandable Battery Runtime |
Runtime is expandable with any number of user supplied wet, gel or SLA batteries
|
| Expandable Runtime Description |
Runtime is expandable with any number of user supplied wet, gel or SLA batteries
|
| High Voltage Transfer to Battery Power |
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to 145 - see manual)
|
| Transfer Time (Line Power to Battery Mode) |
16.6 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)
|
| Low Voltage Transfer to Battery Power |
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V - see manual)
|
| AC Suppression Joule Rating |
450
|
| Continuous Output Capacity (Watts) |
750
|
| Cooling Method |
Multi-speed fan
|
| DC System Voltage (VDC) |
|
| Form Factor Supported |
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
|
| Front Panel LEDs |
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
|
| Input Connection Type |
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug
|
| LED Indicators |
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
|
| Amperage Rating per watt |
DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 8 amps at 120VAC with full inverter and charger load (4.2A max charger-only)
|
| Output Frequency Regulation |
60 Hz (+/- 0.3 Hz)
|
| Output Voltage Regulation |
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
|
| Overload Protection |
Includes 6A AC input breaker dedicated to the charging system and 8A output breaker for AC output loads
|
| Peak Output Capacity (Watts) |
1500
|
| Power Cord Jacket Type |
SJT
|
| Receptacle Color |
Black
|
| Frequency Compatability |
60 Hz
|
| Recommended Electrical Service |
DC INPUT: Requires 12V DC input source capable of delivering 72A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120V AC recommended
|
| Relative Humidity |
0-95% non-condensing
|
| Switches |
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterrupt
|
| Voltage Compatibility (VDC) |
12
|
| Material |
Polycarbonate
|
| Output Receptacles |
5-15R
|
| Package Contents |
APS750 750W PowerVerter APS 12V DC 120V AC Inverter/Charger
Owner’s manual |
| Input Nominal Voltage |
120 VAC
|
| Product Features |
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug
Expandable Runtime |
| Product Highlights |
Auto-transfer switching option for UPS operation
750W continuous output power; 1500W peak power Rugged polycarbonate housing resists moisture and impact Delivers clean 120V AC power from AC or DC power source Protects against blackouts, surges and EMI/RFI line noise |
| Nominal Output Voltage |
120V
|
| Voltage Compatibility (VAC) |
120 VAC
|
Support from Eaton
Product specifications
