Download document () of 20
Send email
Download
You have exceeded the download limit
3600W APS INT Series 36VDC 230V Inverter/Charger with Auto-Transfer Switching, Line-Interactive AVR
Delivering Reliable Power Away from Standard AC Outlets
This inverter/charger is a reliable power source for a wide variety of equipment ranging from power tools and pumps to portable lighting and computer equipment in heavy-load conditions. With no fumes, fuel or excess noise, it’s an excellent alternative to generator power. It converts stored power from a DC battery source to safe, stable, computer-grade AC power for unlimited runtime.
Recommended for Mobile, Emergency and Remote Sites
Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment, this power inverter is ideal for powering tools, saws, motors, pumps, portable lighting, appliances and computer equipment in heavy-load conditions.
Meets Normal and Peak Power Demands
The DC-to-AC inverter features an automatic line-to-battery transfer switch and integrated charging system that allow it to work as a vehicle inverter, standalone AC power source or extended-run UPS system. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage.
Serves as a Battery Charger
When external AC power is supplied and powering connected equipment, this charger/inverter keeps the user-supplied battery charged while simultaneously delivering AC power to connected equipment.
| Product Name |
Eaton Tripp Lite series power inverter and charger
|
| Catalog Number |
APSINT3636VR
|
| UPC |
037332095985
|
| Product Length/Depth |
20.9 in
|
| Product Height |
13.4 in
|
| Product Width |
14.5 in
|
| Product Weight |
58 lb
|
| Compliances |
RoHS
|
| Product Type |
Power inverter and charger
|
| Battery Charge |
30-amp high/7.5A low
|
| Battery Pack Accessory (Optional) |
98-121 sealed lead acid battery (optional)
|
| Brownout Correction |
Brownouts are automatically boosted by 10%
|
| Expandable Battery Runtime |
Runtime is expandable with any number of user supplied wet or gel type batteries
|
| Expandable Runtime Description |
Runtime is expandable with any number of user supplied wet or gel type batteries
|
| High Voltage Transfer to Battery Power |
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to 264 - see manual)
|
| Transfer Time (Line Power to Battery Mode) |
20 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)
|
| Low Voltage Transfer to Battery Power |
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182V - see manual)
|
| Continuous Output Capacity (Watts) |
3600
|
| Cooling Method |
Multi-speed fan
|
| DC System Voltage (VDC) |
|
| Form Factor Supported |
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
|
| Front Panel LEDs |
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
|
| Input Connection Type |
DC INPUT: Set of DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
|
| LED Indicators |
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
|
| Load Sensing |
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.
|
| Amperage Rating per watt |
DC INPUT: Full continuous load - 114A at 36VDC. AC INPUT: 26 amps at 230VAC with full inverter and charger load (10.4A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
|
| Output Frequency Regulation |
50 Hz (+/- 0.3 Hz)
|
| Output Voltage Regulation |
LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
|
| Overload Protection |
Includes 12A input breaker dedicated to the charging system and 20A output breaker for AC output loads.
|
| Overvoltage Correction |
Over-voltages are automatically reduced by 10%
|
| Peak Output Capacity (Watts) |
7200
|
| Power Cord Jacket Type |
SJT
|
| Frequency Compatability |
50 Hz
|
| Recommended Electrical Service |
DC INPUT: Requires 36VDC input source capable of delivering 114A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 300A minimum battery system fusing is recommended.
|
| Relative Humidity |
0-95% non-condensing
|
| Switches |
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
|
| Voltage Regulation Description |
Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels
|
| Voltage Compatibility (VDC) |
36
|
| Material |
Polycarbonate
|
| Output Receptacles |
Hardwire
|
| Package Contents |
APSRM4 remote control module
Owner’s manual APSINT3636VR 3600W APS INT Series 36V DC 230V AC Inverter/Charger |
| Input Nominal Voltage |
230 VAC
|
| Product Features |
Expandable Runtime
DC INPUT: Set of DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate |
| Product Highlights |
Delivers clean 230V AC power from AC or DC power source
Auto-transfer switching option for UPS operation Includes APSRM4 remote control module 3600W continuous output power; 7200W peak power Corrects brownouts and overvoltages without using battery power |
| Nominal Output Voltage |
230V
|
| Voltage Compatibility (VAC) |
230 VAC
|
Support from Eaton
Product specifications
