Download document () of 20

PINV300SW-120

300W Continuous / 600W Peak2x 5-15R outputs1x USB-A 2.1A 1x 1x USB-C (18W) Charging portsStatus LEDsBlack Aluminum Housing DC Cabling Included

  • USB charging ports keep smartphones, tablets and laptops at full capacity
  • Provides pure sine wave power for mobile devices, including laptops and smartphones
  • NEMA 5-15R outlets deliver continuous output of 300W for powering devices
  • Ideal for areas without power outlets, such as construction sites or mobile offices
  • Rugged aluminum housing designed to withstand rigors of travel and outdoor use

Mobile Power Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle
You don’t have to be near your computer or an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This mobile inverter converts DC power from your car, truck, fleet vehicle, boat or RV’s battery into AC power. Just connect the included battery cables between the inverter’s DC input terminals and the positive and negative terminals on your vehicle’s battery.

AC Outlets Provide Portable Power for Your Mobile Applications
This compact power inverter is ideal for use at remote locations, such as campgrounds, construction sites and mobile offices. Its outlets can power a variety of appliances and power tools, such as low-power lights, camping accessories, portable freezers, battery rechargers for small battery-operated power tools, coffee makers, laptops and mobile office equipment.

Includes the Latest Safety Features to Protect Your Equipment and Battery
An on/off switch offers one-touch control over both AC outlets. If the power input from the vehicle’s battery drops below or above a certain voltage, the mobile power inverter will automatically shut down. LEDs indicate normal and improper operation. A fan begins cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high or low voltage conditions.

Brackets Included for Permanent Mounting
The durable aluminum housing is designed to withstand the rigors of road trips, campouts, business trips, worksites, construction sites and family vacations. Use the built-in mounting brackets to permanently install the inverter in a horizontal position.

General specifications

Product Name
Eaton Tripp Lite series power inverter
Catalog Number
PINV300SW-120
UPC
037332265821
Product Length/Depth
6.72 in
Product Height
3.02 in
Product Width
9.11 in
Product Weight
3.3 lb
Compliances
FCC Compliant
Certifications
CSA Std. C22.2
UL Listed
Global Catalog
PINV300SW-120
Product Type
Power inverter

Product specifications

Battery Pack Accessory (Optional)
User-Supplied; 98-121, BP260
Expandable Battery Runtime
User-Supplied 12VDC battery system
Output AC Waveform (Battery Mode)
Sine wave
Number of Charging Ports
2
Audible Alarm
LOW BATTERY VOLTAGE, OVER-TEMPERATURE, HIGH VOLTAGE, LOW VOLTAGE SHUTDOWN, OVERLOAD PROTECTION
Continuous Output Capacity (Watts)
300
Cooling Method
Temperature Controlled Fans
Cord Length
1.5 ft
DC System Voltage (VDC)
Form Factor Supported
Horizontal floor, wall mounting (AC Output or DC Input side should never be facing vertically)
Front Panel LEDs
NORMAL OPERATION - GREEN, FAULT (SHORT CIRCUIT, OVER-TEMPERATURE, HIGH VOLTAGE, LOW VOLTAGE, OVERLOAD PROTECTION) - RED
Grounding
Grounding lug grounds the inverter to vehicle or earth ground; ground cable included
Input Connection Type
DC terminal posts for included or user-supplied battery cables with ring terminals
LED Indicators
NORMAL OPERATION - GREEN, FAULT (SHORT CIRCUIT, OVER-TEMPERATURE, HIGH VOLTAGE, LOW VOLTAGE, OVERLOAD PROTECTION) - RED
Operating Temperature
32° to 104° F (0° to 40° C), Ideal ambient operating temperature range 5° to 77° F (-15° to 25° C)
Optional Coverage
1-Year, 2-Year, and 3-Year Standard Warranty Extensions
Output Frequency Regulation
60Hz (+/- 0.5Hz)
Output Voltage (VDC)
5V (USB-A); 5V, 9V, 12V (USB-C)
Output Voltage Regulation
110V +/- 10V AC
Overload Protection
Yes
Peak Output Capacity (Watts)
600
Power Cord Jacket Type
SJT
Receptacle Color
Black
Housing Color
Blue
Black
Frequency Compatability
60 Hz
Input Current
30A
Recommended Electrical Service
12V DC
Relative Humidity
0-95% non-condensing
Sine Wave
Pure Sine Wave
Switches
ON/OFF - Rocker Switch
Voltage Compatibility (VDC)
11-15
Material
Aluminum, Sheet Metal, ABS
Output Receptacles
5-15R
Package Contents
Ground wire with clamp
PINV300SW-120 300W Compact Sinewave Power Inverter
Mounting hardware
Owner's manual
(2) DC battery cables, 18 in. (45.7 cm)
Charging Ports / Amps
2.1A
3A / 2A / 1.5A
Charging Method
USB
Product Features
Pure Sine Wave Output
DC terminal posts for included or user-supplied battery cables with ring terminals
USB Charging
Charging Port Type
USB A (FEMALE)
USB C (FEMALE)
Nominal Output Voltage
110V
Voltage Compatibility (VAC)
110 VAC
120 VAC

Export product specification

Need product support?

Support from Eaton