600W Cont / 1200W Pk , 2x 5-15R outputs, 1x USB-A 2.1A,1x USB-C (18W) Char ports, Status LEDs, Blk Alum w Blue Plastic end caps, DC Cabling
Mobile Power Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle
You don’t have to be near your computer or an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This mobile inverter converts DC power from your car, truck, fleet vehicle, boat or RV’s battery into AC power. Just connect the included battery cables between the inverter’s DC input terminals and the positive and negative terminals on your vehicle’s battery.
AC Outlets Provide Portable Power for Your Mobile Applications
This compact power inverter is ideal for use at remote locations, such as campgrounds, construction sites and mobile offices. Its outlets can power a variety of appliances and power tools, such as low-power lights, camping accessories, portable freezers, battery rechargers for small battery-operated power tools, coffee makers, laptops and mobile office equipment.
Includes the Latest Safety Features to Protect Your Equipment and Battery
An on/off switch offers one-touch control over both AC outlets. If the power input from the vehicle’s battery drops below or above a certain voltage, the mobile power inverter will automatically shut down. LEDs indicate normal and improper operation. A fan begins cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high or low voltage conditions.
Brackets Included for Permanent Mounting
The durable aluminum housing is designed to withstand the rigors of road trips, campouts, business trips, worksites, construction sites and family vacations. Use the built-in mounting brackets to permanently install the inverter in a horizontal position.
| Product Name |
Eaton Tripp Lite series power inverter
|
| Catalog Number |
PINV600SW-120
|
| UPC |
037332266736
|
| Product Length/Depth |
6.72 in
|
| Product Height |
3.02 in
|
| Product Width |
10.37 in
|
| Product Weight |
4.3 lb
|
| Compliances |
FCC Compliant
|
| Certifications |
UL Listed
CSA Std. C22.2 |
| Global Catalog |
PINV600SW-120
|
| Product Type |
Power inverter
|
| Battery Pack Accessory (Optional) |
98-121; BP160
|
| Expandable Battery Runtime |
User-supplied battery system
|
| Output AC Waveform (Battery Mode) |
Pure sine wave
|
| Number of Charging Ports |
2
|
| Audible Alarm |
LOW BATTERY VOLTAGE, OVER-TEMPERATURE, HIGH VOLTAGE, LOW VOLTAGE SHUTDOWN, OVERLOAD PROTECTION
|
| Continuous Output Capacity (Watts) |
600
|
| Cooling Method |
Temperature Controlled Fans
|
| Cord Length |
1.5 ft
|
| DC System Voltage (VDC) |
|
| Form Factor Supported |
Horizontal Floor or Wall-mount
|
| Front Panel LEDs |
NORMAL OPERATION - GREEN, FAULT (SHORT CIRCUIT, OVER-TEMPERATURE, HIGH VOLTAGE, LOW VOLTAGE, OVERLOAD PROTECTION) - RED
|
| Grounding |
Ground Terminal post
|
| Input Connection Type |
DC Terminal post for use with included or user-supplied battery cabling with ring terminals.
|
| LED Indicators |
NORMAL OPERATION - GREEN, FAULT (SHORT CIRCUIT, OVER-TEMPERATURE, HIGH VOLTAGE, LOW VOLTAGE, OVERLOAD PROTECTION) - RED
|
| Operating Temperature |
|
| Operating Temperature Range |
0-40°C (32°F to 104°F)
|
| Optional Coverage |
1-Year, 2-Year, 3-Year standard warranty extensions
|
| Output Frequency Regulation |
60Hz +/- 0.5Hz
|
| Output Voltage (VDC) |
5V (USB-A); 5V/9V/12V (USB-C)
|
| Output Voltage Regulation |
110V +/- 10V
|
| Overload Protection |
Yes
|
| Peak Output Capacity (Watts) |
1200
|
| Power Cord Jacket Type |
SJT
|
| Receptacle Color |
Black
|
| Housing Color |
Black
Blue |
| Frequency Compatability |
60 Hz
|
| Recommended Electrical Service |
12VDC Battery System
|
| Relative Humidity |
10-95% (non-condensing)
|
| Sine Wave |
Pure Sine Wave
|
| Switches |
ON/OFF - ROCKER SWITCH
|
| Voltage Compatibility (VDC) |
11-15
|
| Material |
Aluminum, Steel, ABS
|
| Output Receptacles |
5-15R
|
| Package Contents |
PINV600SW-120 600W Light-Duty Compact Power Inverter
Owner's manual Mounting hardware (2) DC battery cables, 18 in. (45.7 cm) Ground wire with clamp |
| Charging Ports / Amps |
2.1A
3A / 2A / 1.5A |
| Charging Method |
USB
|
| Product Features |
Pure Sine Wave Output
DC Terminal post for use with included or user-supplied battery cabling with ring terminals. USB Charging |
| Charging Port Type |
USB A (FEMALE)
USB C (FEMALE) |
| Nominal Output Voltage |
110V
|
| Form Factor |
Horizontal Floor or Wall-mount
|
Support from Eaton