Download document () of 20
Send email
Download
You have exceeded the download limit
1000W PowerVerter Compact Inverter for Trucks with 4 Outlets
Mobile Power Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle
You don’t have to be near your computer or an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This mobile inverter converts DC power from your car, truck, fleet vehicle, boat or RV’s battery into AC power. Just connect the included battery cables between the inverter’s DC input terminals and the positive and negative terminals on your vehicle’s battery.
AC Outlets Provide Portable Power for Your Mobile Applications
This compact power inverter is ideal for use at remote locations, such as campgrounds, construction sites and mobile offices. Its outlets can power a variety of appliances and power tools, such as low-power lights, camping accessories, portable freezers, battery rechargers for small battery-operated power tools, coffee makers, laptops and mobile office equipment.
Includes the Latest Safety Features to Protect Your Equipment and Battery
An on/off switch offers one-touch control over both AC outlets. If the power input from the vehicle’s battery drops below or above a certain voltage, the mobile power inverter will automatically shut down. LEDs indicate normal and improper operation. A fan begins cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high or low voltage conditions.
Brackets Included for Permanent Mounting
The durable aluminum housing is designed to withstand the rigors of road trips, campouts, business trips, worksites, construction sites and family vacations. Use the built-in mounting brackets to permanently install the inverter in a horizontal position.
| Product Name |
Eaton Tripp Lite series PowerVerter power inverter
|
| Catalog Number |
PV1000HF
|
| UPC |
037332097187
|
| Product Length/Depth |
18.4 in
|
| Product Height |
4.4 in
|
| Product Width |
7.8 in
|
| Product Weight |
6 lb
|
| Compliances |
RoHS
|
| Global Catalog |
PV1000HF
|
| Product Type |
Power inverter
|
| Audible Alarm |
Dual function alarm indicates overload conditions or low DC input voltage of 10.5V or less
|
| Continuous Output Capacity (Watts) |
1000
|
| Cooling Method |
Fan
|
| Cord Length Details |
User supplies cabling. Minimum gauges for full load operation: #4 wire (12 ft max), #2 wire (20 ft max), #0 wire (31 ft max).
|
| DC System Voltage (VDC) |
|
| Form Factor Supported |
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
|
| Front Panel LEDs |
Set of 6 LEDs offer continuous status information on battery and connected load conditions
|
| Input Connection Type |
Set of 2 DC bolt-down wiring terminals
|
| LED Indicators |
Set of 6 LEDs offer continuous status information on battery and connected load conditions
|
| Amperage Rating per watt |
Full continuous load - 100A at 12V DC, No load - 1.5A at 12V DC, Shutdown / load sense mode - 100 micro amps
|
| Output Frequency Regulation |
60 Hz (+/- 5% Hz)
|
| Output Voltage Regulation |
Maintains PWM sine wave output voltage of 115 VAC (+/- 10% VAC)
|
| Overload Protection |
Automatic overload protection shuts down inverter system in the event of overloads. Inverter and electrical system are further protected via four internal 40A automotive fuses
|
| Peak Output Capacity (Watts) |
2000
|
| Power Cord Jacket Type |
SJT
|
| Frequency Compatability |
60 Hz
|
| Recommended Electrical Service |
Requires 12V DC input source capable of delivering 100A for the required duration (when used at full capacity). For automotive applications, hardwire installation with 175A battery system fusing is recommended.
|
| Relative Humidity |
0-95% non-condensing
|
| Switches |
3 position rocker switch enables on/off power control, plus "remote" setting which enables inverter to be remotely powered on or off when used in conjunction with APSRM4 Remote Control Module (sold separately)
|
| Voltage Compatibility (VDC) |
12
|
| Material |
Aluminum, Steel
|
| Output Receptacles |
5-15R
|
| Package Contents |
PV1000HF Inverter
Instruction manual Warranty information |
| Product Features |
Set of 2 DC bolt-down wiring terminals
|
| Nominal Output Voltage |
120V
|
Support from Eaton
Product specifications
