Download document () of 20
Send email
Download
You have exceeded the download limit
SmartPro 230V 1kVA 750W Medical-Grade Line-Interactive Tower UPS with 6 Outlets, Full Isolation, Expandable Runtime
| Product Name |
Eaton Tripp Lite series SmartPro UPS
|
| Catalog Number |
SMX1200XLHG
|
| UPC |
037332140425
|
| Product Length/Depth |
13.38 in
|
| Product Height |
18.5 in
|
| Product Width |
12.2 in
|
| Product Weight |
45.5 lb
|
| Compliances |
RoHS
CE Marked |
| Certifications |
UL Listed
|
| Global Catalog |
SMX1200XLHG
|
| Product Type |
UPS
|
| Topology |
Line-interactive
|
| Form factor |
Tower
|
| VA rating |
230 VAC
|
| Package contents |
|
| Input connection |
C14 inlet
|
| Input nominal voltage |
230 VAC
|
| Nominal frequency |
50/60 Hz
|
| Input frequency range |
50/60 Hz
|
| Receptacle |
C13
|
| Electric current - max |
5A
|
| Battery replacement |
RBC36SLT
|
| Runtime at half load |
27.5 min
|
| Relative humidity |
0-95% non-condensing
|
| Output Receptacles |
C13
|
| Output Receptacles Details |
Compatible with Eaton Tripp Lite Power Cords
|
| Product Features |
Expandable Runtime
|
| Nominal Output Voltage |
220V
230V 240V |
| Network Management Cards Details |
Network management not supported
|
| Communication interface |
USB
DB9 Serial |
| Voltage Compatibility (VAC) |
230 VAC
|
| Battery Access |
Battery access door allows hot swap battery replacement without powering connected equipment off
|
| Typical Battery Runtime |
Expandable Runtime
|
| Expandable Runtime Description |
Supports extended runtime with optional BP36V15-2U (limit 1) and BP36V42-3U external battery pack (multi-pack compatible)
|
| Dc Voltage |
36
|
| Operating Temperature Range |
32° to 104°F (0° to 40°C)
|
| Typical Battery Life |
3-6 years, depending on usage
|
| Grounding Details |
Ground Potential Equalization Connector: POAG-S6/20
|
| High Voltage Transfer to Battery Power |
274
|
| Low Voltage Transfer to Battery Power |
155
|
| Undervoltage Correction |
Input voltages between 183 and 199 are boosted by 10%
|
| Application |
Hospital/Medical
|
| Switch configuration |
Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions
|
| AC suppression joule rating |
340
|
| Housing material |
PVC
|
| Output AC waveform (battery mode) |
PWM sine wave
|
| Output Capacity (kVA) |
1
|
| Output Capacity (kW) |
0.75
|
| Output Capacity (VA) |
1000
|
| Primary UPS Depth (mm) |
231
|
| Primary UPS Height (mm) |
323
|
| Primary UPS Width (mm) |
191
|
| AC Suppression Response Time |
Instantaneous
|
| Audible Alarms |
Audible Alarm is factory muted for silent operation; Audible alarm can be restored to indicate power failure, overload conditions and Low Battery events using our Free Power Alert UPS management software.
|
| Battery Start Capability |
Cold-start operation supported
|
| Cooling Method |
UPS cooling via rear-exit fan
|
| LED Indicators |
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
|
| Frequency Rating Details |
Automatic frequency selection
|
| Output Voltage Regulation (Line Mode) |
-18%, +8%
|
| Overvoltage Correction |
Input voltages between 245 and 274V AC are reduced by 9%
|
| Rechargeable Battery |
Less than 4.5 hours from 10% to 90%
|
| Recommended Electrical Service |
10A 230V
|
| Storage Temperature |
5° to 122°F (-15° to 50°C)
|
| Nominal Voltage Details |
230v nominal inverter output voltage
|
| Voltage Regulation Description |
Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable, computer grade output without consuming battery power over an input voltage range of 155 to 274V AC.
|
| Maximum Input Amps |
5
|
| UPS Input Cord Length (m) |
0.2
|
| UPS Power Module Dimensions |
12.7 x 7.5 x 9.1
|
| Power Mode Transfer Time |
2-4 milliseconds
|
| Optional Accessories |
Wallmount (UPSWM - tower mounting kit)
|
| EMI AC Noise Suppression |
EMI / RFI AC Noise Suppression
|
| UPS Input Connection Type |
C14 inlet
|
| External Battery Pack Compatibility |
BP36V15-2U (limit 1)
BP36V42-3U (multi-pack compatible) BP36V27-2US (multi-pack compatible) |
| High Availability UPS Features |
Surge/noise protection
|
| Primary Form Factor |
Tower
|
Support from Eaton
Product specifications
