Download document () of 20
Send email
Download
You have exceeded the download limit
PowerVerter 120V 750W Utility/Work Truck 12VDC Inverter/Charger, 2-NEMA 5-15R GFCI
Delivering Reliable Power Away from Standard AC Outlets
This inverter/charger is a reliable power source for a wide variety of equipment ranging from power tools and pumps to portable lighting and computer equipment in heavy-load conditions. With no fumes, fuel or excess noise, it’s an excellent alternative to generator power. It converts stored power from a DC battery source to safe, stable, computer-grade AC power for unlimited runtime.
Recommended for Mobile, Emergency and Remote Sites
Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment, this power inverter is ideal for powering tools, saws, motors, pumps, portable lighting, appliances and computer equipment in heavy-load conditions.
Meets Normal and Peak Power Demands
The DC-to-AC inverter features an automatic line-to-battery transfer switch and integrated charging system that allow it to work as a vehicle inverter, standalone AC power source or extended-run UPS system. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage.
Serves as a Battery Charger
When external AC power is supplied and powering connected equipment, this charger/inverter keeps the user-supplied battery charged while simultaneously delivering AC power to connected equipment.
| Product Name |
Eaton Tripp Lite series PowerVerter power inverter and charger
|
| Catalog Number |
UT750UL
|
| UPC |
037332124401
|
| Product Length/Depth |
10.7 in
|
| Product Height |
12.6 in
|
| Product Width |
10.7 in
|
| Product Weight |
17.4 lb
|
| Compliances |
RoHS
|
| Certifications |
CSA certified
UL Listed |
| Product Type |
Power inverter and charger
|
| Outlets |
2 NEMA 5-15R GFCI protected outlets
|
| Battery Charge |
11A / 45A (selectable)
|
| Battery Pack Accessory (Optional) |
98-121 sealed lead acid battery (optional)
|
| Expandable Battery Runtime |
Runtime is expandable with any number of user supplied wet or gel or AGM type Batteries.
|
| High Voltage Transfer to Battery Power |
In AC "auto" mode, inverter / charger switches to battery mode as line voltages increases to 145V (user adjustable to 145 - see manual)
|
| Transfer Time (Line Power to Battery Mode) |
16.6 milliseconds (typical -compatible with many computers, servers and networking equipment-verify transfer time compatibility loads for UPS applications)
|
| Low Voltage Transfer to Battery Power |
In AC "auto" mode, inverter / charger switches to battery mode as line voltage drops to 75V (user adjustable to 85,95,105 - see manual)
|
| AC Suppression Joule Rating |
450
|
| Continuous Output Capacity (Watts) |
750
|
| Cooling Method |
Multi-speed fan
|
| Cord Length Details |
DC INPUT: User supplies cabling. 6 gauge or larger (see manual) AC INPUT: attached 6ft. AC line cord with plug.
|
| DC System Voltage (VDC) |
|
| Form Factor Supported |
Mounting slots enable permanent placement of inverter on any horizontal surface. (see manual for additional mounting information)
|
| Front Panel LEDs |
Set of (6) LEDs offer continuous status information on load percentage ( 6 levels reported) and battery charge level (7 levels reported) See manual for sequences
|
| Input Connection Type |
DC INPUT: Set of two DC bolt-down terminals. AC INPUT: NEMA 5-15R input plug
|
| LED Indicators |
Set of (6) LEDs offer continuous status information on load percentage ( 6 levels reported) and battery charge level (7 levels reported) See manual for sequences
|
| Load Sensing |
Load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level.
|
| Amperage Rating per watt |
DC INPUT: Full continuous load of 73A at 12 VDC. AC INPUT 29 amps at 120 VAC with full inverter and charger load (9.3A max charger only / combined input load to support charger and AC output is automatically controllable to 66% - 33% - 0% based on AC)
|
| Outlet Details |
2 NEMA 5-15R GFCI protected outlets
|
| Output Frequency Regulation |
60 Hz (+/- 0.3Hz)
|
| Output Voltage Regulation |
LINE POWER (AC): Maintains 120V nominal sine wave output from line Source. Inverter Power (AC) Maintains PWM sine wave output voltage of 120 VAC (+/- 5%)
|
| Overload Protection |
Includes 10A input breaker dedicated to the charging system and 12A output breaker for AC output loads.
|
| Peak Output Capacity (Watts) |
1500
|
| Power Cord Jacket Type |
SJT
|
| Receptacle Color |
White
|
| Frequency Compatability |
60 Hz
|
| Recommended Electrical Service |
DC INPUT: Requires 12VDC input source capable of delivering 73A for the required Duration (when used at full continuous capacity- DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120VAC recommended.
|
| Relative Humidity |
0-95% non-condensing
|
| Switches |
3 position on / off remote switch enables simple on / off power control plus "auto/ remote"
|
| Voltage Compatibility (VDC) |
12
|
| Material |
Polycarbonate
|
| Output Receptacles |
5-15R
|
| Package Contents |
UT750UL Inverter/Charger
Instruction manual with warranty information APSRM4 Remote |
| Input Nominal Voltage |
120 VAC
|
| Product Features |
Expandable Runtime
DC INPUT: Set of two DC bolt-down terminals. AC INPUT: NEMA 5-15R input plug |
| Product Highlights |
DoubleBoost inverter output
Switching option for battery backup / UPS operation 12V DC or 120VAC input; 120VAC output; 2 GFCI protected outlets Meets OSHA requirements 3 stage, 45A / 11A selectable wet / gel / AGM cell battery charger 750 watts continuous, 1125 watts OverPower and 1500 watts Built-in Isobar® premium AC surge protection and Auto Transfer |
| Nominal Output Voltage |
120V
|
| Voltage Compatibility (VAC) |
120 VAC
|
Support from Eaton
Product specifications
